Michigan Metrology: Confidential 3d Surface Roughness Measurement Analysis in One Week or Less
MichMet Home  |  Back  |   Print Page  |  Bookmark This Page

Quick Jump to parameter of Interest:

bulletStandard Artifacts
bulletAmerican Engineering Standards
bulletInternational Standards Organization (ISO) Engineering Standards
bulletEngineering Standards Under Development
bulletStandards Organizations

 

Standard Artifacts
NIST Ra Standards Roughness Standards
VLSI Standards Step Standards and Thin Film Standards
Flexbar Surface Roughness – Various machining process

Go To Top Button - Michigan Metrology for Surface, finish, wear, wyco, veeco

American Engineering Standards
ASME B46.1 1995 & 2002 Surface Texture (Surface Roughness, Waviness and Lay)
Y 14.36 Surface Texture Symbols

Go To Top Button - Michigan Metrology for Surface, finish, wear, wyco, veeco

International Standards Organization (ISO) Engineering Standards
ISO 5436-1:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures
ISO 4288:1996  Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture
ISO 4287:1997  Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
ISO 3274:1996  Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
ISO 13565-3:1998  Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve
ISO 13565-2:1996  Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
ISO 13565-1:1996  Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions
ISO 12179:2000  Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
ISO 12085:1996  Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters
ISO 11562:1996  Geometrical Product Specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters
ISO 10110-8:1997  Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 8: Surface texture
ISO 1302:2002 Technical Drawings – Method of indicating surface texture.

Go To Top Button - Michigan Metrology for Surface, finish, wear, wyco, veeco

Engineering Standards Under Development

ISO Standards
3D Standards Under Development

Go To Top Button - Michigan Metrology for Surface, finish, wear, wyco, veeco

Standards Organizations
bulletAmerican Society of Mechanical Engineers (ASME)
bulletAmerican National Standards Institute (ANSI)
bulletInternational Organization for Standardization (ISO)
bulletGerman Institute for Standardization (DIN)
bulletJapanese Standards Association
bullet British Standards Institute (BSI)
bulletAmerican National Institute of Standards and Technology (NIST)
bulletAmerican Standards for Testing of Materials (ASTM)
bulletAssociation Francaise de Normalisation (AFNOR)
bulletOther Standards

Go To Top Button - Michigan Metrology for Surface, finish, wear, wyco, veeco

Hit Counter